ALL-IN-ONE, 15 KWH
Fifteen kilowatt-hours in a cabinet 16 cm deep
The Huawei Power-M 15kWh is a complete home backup system in one cabinet: a 5 kW hybrid inverter, a built-in solar charge controller and three 5 kWh lithium iron phosphate battery modules, stacked on a single floor base. Fully built, it stands about 1.48 m tall and 70 cm wide, and it is only 16 cm deep, so it sits against a wall like a radiator rather than taking over a room.
Fifteen kilowatt-hours is the size most families choose when they want the house to carry on as normal through a long outage. Lights, Wi-Fi, TVs, laptops, the fridge and freezer, the gate motor and the alarm can run through an evening and the night that follows, and with solar panels connected the batteries refill during the day.
This is the same system that EcoHub’s director has run in his own dining and music room since 2022, which is why we can talk about it from use rather than from a brochure.

I installed the Huawei Power-M at my house in 2022 when we had regular stage 6 load shedding. Having started with one battery, I later upgraded to two batteries, then added solar panels, and eventually a third battery. With the current setup, which includes eight solar panels, my house is virtually off grid. The system is installed in my dining and music room. It’s virtually silent and looks great.
Dylan Phelan, EcoHub director

HOW IT GROWS
One power module, up to three batteries a tower
The Power-M is modular. The power module on top holds the inverter, the charger and the controls, and each battery module below it adds 5 kWh. The 15kWh configuration is the full single tower: one power module and three batteries, which is also the point at which Huawei’s floor bracket is full.
Huawei allows up to six battery modules on one power module, so the system can grow beyond a single tower if your needs change; a fourth battery starts a second stack beside the first. For more output as well as more storage, two or three power modules can run in parallel, as in our 10kW / 20kWh and 10kW / 30kWh systems.
Every battery module is identical, so the Power-M 5kWh battery module you might add later slots in exactly like the three that ship with this system.
QUIET ENOUGH FOR THE LOUNGE
Built to live in the room, not hidden from it
Most inverter and battery combinations end up in a garage because of how they look and sound. The Power-M was designed the other way round: a matt white aluminium enclosure, rounded corners, no visible cabling once installed, and a single round status display with a green LED ring.
Huawei rates it at 40 dBA or less at one metre, about the level of a quiet library, and the modules are cooled without a noisy fan running all evening. In our director’s house it shares the room with a piano, and guests rarely notice it until they ask what it is.
The modules carry an IP66 rating on Huawei’s specification sheet, so the cabinet can also go on a sheltered patio or in a garage if that suits your wiring better. It mounts on the supplied floor base or on a wall.





WHERE IT LIVES
At home in a lounge, a study or a music room
Because it is slim and quiet, the Power-M can go where your distribution board is easiest to reach, rather than where the noise and the look can be hidden. Passages, studies, dining rooms and open-plan living areas are all common.
The room pictures here show the 15kWh tower in typical South African homes. The fourth is our director’s own system as it started out in 2022, with a single battery, before he added a second and then a third.
Plan for 70 cm of wall, a little clearance at the sides for cabling, and a spot out of direct sun. Your installer will confirm the exact position against your distribution board.
SOLAR WHEN YOU’RE READY
Add panels on day one or a year later
The Power-M is a hybrid system: the solar charge controller is built into the power module, so panels connect directly with no extra hardware. Huawei rates the input at up to 5.5 kWp across two strings on one MPPT, which suits most residential roofs.
Without panels it works as a backup system, charging from the grid between outages. With panels, the sun runs the house during the day and refills the batteries for the evening, and the grid becomes the fallback rather than the main supply. Our director runs his 15kWh system with eight panels and describes his house as virtually off grid.
Everything is visible in Huawei’s FusionSolar app: battery level, solar production, what the house is drawing and where the power is coming from, at home or remotely.


MADE FOR SOUTH AFRICAN POWER
Load-shedding, load reduction and municipal outages
When the grid drops, the Power-M takes over the backed-up circuits automatically, and Huawei quotes the switchover at 0.02 seconds. Clocks don’t reset, the Wi-Fi stays up and the TV keeps playing. When supply returns it switches back and recharges.
The 5 kW output, with a 6 kW bypass, covers far more than the essentials. Our director’s 15kWh, with eight solar panels, runs everything in his house except the geyser, including the 1.1 kW pump on a 12 m lap pool. The geyser is the one load most owners leave on the grid. With solar panels up, a household that doesn’t use much electricity can fit a 2 kW PTC element on a daytime timer and let the panels heat the water through the Power-M. Without panels it isn’t worth it: the batteries would only be storing grid power to heat water.
This is Huawei’s 220 to 240 V single-phase model, supplied through Huawei’s South African distribution with a local 10-year warranty. Grey imports and on-demand overseas listings do not carry that warranty, and some are built for other markets.
What the Power-M 15kWh will run, and for how long
Two numbers decide what a backup system does for you: its output, which limits what can run at the same time, and its storage, which decides how long it lasts. The Power-M 15kWh delivers up to 5 kW from 15 kWh of usable storage. The tables below use typical South African household figures; check the rating plate on your own appliances, and your installer will size the backed-up circuits with you.
How long it lasts
| Average load | What that looks like | Runtime on 15 kWh |
|---|---|---|
| 300 W | a light essentials load: lights, Wi-Fi, TV, laptops | about 45 hours |
| 500 W | typical essentials, adding the fridge-freezer, gate and alarm | about 27 hours |
| 1 000 W | a larger home with most plugs and lights backed up | about 13½ hours |
| 2 000 W | essentials plus regular kettle, microwave and appliance use | about 6¾ hours |
Runtimes allow about 10% for conversion losses. If the system has had no solar input for 24 hours, Huawei keeps a 15% reserve to protect the cells, so expect a little less after a long overcast spell. With solar panels connected, the batteries refill during the day.
What it will run
| Appliance | Typical draw | On the Power-M 15kWh |
|---|---|---|
| LED lights, ten bulbs | 100 W | Yes |
| Wi-Fi router and fibre box | 20 W | Yes |
| TV and decoder | 150 W | Yes |
| Laptop | 60 W | Yes |
| Fridge-freezer (average over a day) | 150 W | Yes |
| Gate motor and alarm (average) | 50 W | Yes |
| Microwave | 1 200 W | Yes, alongside the essentials |
| Air fryer | 1 500 W | Yes, alongside the essentials |
| Kettle | 2 200 W | Yes, alongside the essentials |
| Hair dryer | 2 000 W | Yes, alongside the essentials |
| Pool or borehole pump | 1 100 W | Yes; best run in daylight on solar, since 8 hours at 1.1 kW uses 8.8 kWh |
| Oven or stove plate | 2 500 W | It can, but it draws the batteries down fast |
| Geyser element | 3 000 W | Usually left on the grid; with solar panels, a 2 kW PTC element on a daytime timer suits a low-usage home |
The 15kWh has the same output as the 10kWh and half as much storage again. That extra storage is what carries a household through a long evening outage and the night after, or through the hours after sunset on a solar-powered day.
The Power-M in operation
Huawei Digital Power’s South African team demonstrates the Power-M’s features and how the modules fit together.
Power-M 15kWh specifications
| Configuration | 1 power module (MAP05A1), 3 battery modules (MAB05B1), floor base |
| Output by battery count | 1 battery: 2.5 kW. 2 or more: 5 kW (6 kVA) |
| Expansion | Up to 3 batteries per tower, 6 per power module; up to 3 power modules in parallel |
| Solar input detail | 90–420 V DC MPPT range, 2 strings, 1 MPPT, up to 8 optimisers |
| AC input | 200–240 V, 50/60 Hz, 30 A maximum, 6 kW bypass |
| Switchover | Not on Huawei’s spec sheet; Huawei marketing quotes 0.02 s |
| Noise | 40 dBA or less at 1 m (30 °C ambient) |
| Ingress protection | IP66 (Huawei spec sheet; IP65 in its 2021 brochure) |
| Operating range | 0 to 45 °C, 5–95% relative humidity |
| Cycle life | 6,000 cycles at 25 °C and 80% depth of discharge (Huawei brochure) |
| Module sizes (W × H × D) | Power module 700 × 246 × 152 mm, 17 kg. Battery 700 × 390 × 158 mm, 50 kg. Floor base 700 × 65 × 147 mm |
| Monitoring | Huawei FusionSolar app over Wi-Fi, Ethernet or 4G |
| Certification | IEC 62619, IEC 62109-1/-2, IEC 62920, UN 38.3 |
Huawei’s documentation: Power-M brochure (PDF) and the FusionSolar app guide (PDF).
How the Power-M 15kWh sits against the alternatives
Within the range, the Power-M 10kWh has the same 5 kW output and one battery fewer. It suits households that mostly need to bridge evening outages, and it can be brought up to 15 kWh later with an extra battery module. If you expect long outages or plan to run on solar most of the time, starting at 15 kWh avoids a second visit from the installer.
The EcoFlow PowerOcean 6kW is the closest alternative we stock: also modular, in 5, 10 and 15 kWh configurations, with a 6 kW inverter against the Power-M’s 5 kW. It is the better choice if you need the extra kilowatt of output or want an EcoFlow ecosystem. The Power-M’s case is its slim 16 cm profile, its very quiet running and a track record in South African homes going back to 2022.
The Midea HICONICS 5kW matches the Power-M on output and adds a second MPPT for panels on two roof faces; Midea quotes 10,000 cycles at 90% depth of discharge for its CATL cells against Huawei’s 6,000 at 80%. For a small flat or a few essential circuits, the Sunsynk Powerlynk X is a compact 3.6 kW unit with 3.84 kWh of storage, a different class of system from a 15 kWh tower.
Questions we are asked about the Power-M 15kWh
Divide the capacity by what you are running and allow about 10% for conversion losses. Essentials for a typical family (lights, Wi-Fi, TVs, laptops, fridge and freezer, gate motor and alarm) average around 500 W, so 15 kWh lasts roughly 27 hours. A four-hour load-shedding slot at that load uses about 2.2 kWh, roughly a seventh of the battery.
Huawei rates each battery module at 5 kWh usable. If the system has had no solar input for 24 hours it keeps a 15% reserve to protect the cells, so plan on about 12.75 kWh in that situation.
The kettle, microwave, air fryer and pool pump, yes. Our director’s 15kWh with eight solar panels runs his whole house, including the 1.1 kW pump on a 12 m lap pool; the only thing he leaves on the grid is the geyser. A standard 3 kW geyser element would empty 15 kWh in around five hours, so it usually stays on the grid side. If you have solar panels up and the household doesn’t use much electricity, a 2 kW PTC element on a daytime timer lets the panels heat the water through the Power-M. Without solar it isn’t worth it, because the batteries would only be storing grid power to heat water. Two Power-M units in parallel (10 kW) run a standard 3 kW element comfortably, again with the panels doing the work. An oven works, but it draws the batteries down quickly.
Yes. The solar charge controller is built into the power module, so panels connect straight to it with no separate charger. Huawei rates the input at up to 5.5 kWp across two strings on one MPPT, within a 90 to 420 V DC window, and it supports up to eight Huawei optimisers. In practice that is roughly eight to ten modern panels per power module, depending on their wattage and how your installer strings them. Our director runs eight panels on his own 15kWh system.
Plenty of owners start with backup only and add panels a year later. Nothing on the Power-M changes when you do; your installer runs the cables to the PV input and enables solar in the app.
The 15kWh is a full single tower. Huawei allows up to six battery modules on one power module, so a fourth battery starts a second stack beside the first. If you also need more output than 5 kW, a second power module in parallel is the better route; talk to us about sizing before you buy.
Yes. It is wired into your distribution board, so it must be installed by a qualified electrician who issues a Certificate of Compliance. We supply the equipment and can refer you to one of our trusted, Huawei-trained installers, who cover all major cities and most areas of South Africa; the installer quotes and carries out the work, and is responsible for it.
You can also use your own installer. They supply the cabling, isolators, changeover switch and earth leakage, then commission the system and connect it to your Wi-Fi through Huawei’s FusionSolar app.
Huawei rates the modules IP66 (its 2021 brochure says IP65), and the cabinet is approved for indoor or sheltered outdoor installation, on the floor or on a wall. It runs between 0 and 45 °C. Huawei’s South African installation guide asks for a spot out of direct sun and rain, away from taps, drains and sprinklers, and rules out outdoor installation within 500 m of the sea, where salt air corrodes the enclosure. Indoors, at the coast, is fine.
Because it is rated at 40 dBA or less at one metre, most owners put it inside: a passage, a study, a dining room or the garage.
Fast enough that lights, TVs, Wi-Fi and laptops carry on without a flicker in normal use. Huawei’s own marketing material quotes 0.02 seconds. Its published specification sheet does not list a transfer time, so we give that figure as Huawei’s rather than our own measurement. If you run something that cannot tolerate any interruption at all, such as a server, keep a small UPS in front of it as well.
The Power-M carries Huawei’s 10-year warranty, supported in South Africa through Huawei’s local distributor. If a module develops a fault, contact us with your order number: we log the claim, follow it up and keep you informed until it is resolved.
The warranty covers the equipment. Faults caused by the installation itself, such as wiring or protection errors, are the installer’s workmanship and are taken up with them, which is one reason a Certificate of Compliance matters.
Fake online stores have advertised the Power-M at prices no genuine seller can match, then disappeared with the payment. EcoHub has sold Huawei backup systems since the Power-M arrived in South Africa in 2022 and has traded as an online store since 2012. Our stock comes through Huawei’s South African distribution, which is what makes the local warranty valid. If a price looks too good to be true, check the seller’s history before you pay.
Yes. You can collect from our Kempton Park warehouse or have it delivered; choose at checkout and the delivery cost is shown before you pay. Each battery module weighs about 50 kg and the power module about 17 kg, so this system weighs about 168 kg before packaging. Bring a second person, or have your installer collect it.

Why Buy From EcoHub
Power-M market leaders
We have sold the Huawei Power-M since it reached South Africa in 2022 and are one of its largest suppliers in the country. Our director runs one in his own home.
Trusted by installers
Installers and electrical contractors across South Africa buy their Power-M systems from us, and we refer customers to experienced Power-M installers in most areas.
The right system, first time
Every system comes through Huawei’s South African distribution with the local 10-year warranty, and advice on sizing comes from a specialist store trading since 2012.
Delivery or collection
Collect from Kempton Park or have it delivered across South Africa in 1–3 working days. Orders are generally ready within 24 hours of payment.

Excellent service and customer focused business. Dylan was very professional and provided timeous feedback to our queries.