ONE PER STACK
Connects each battery stack to the PowerOcean Plus
The EcoFlow Base and Junction Box is the foundation and connection point for every battery stack on a three-phase PowerOcean Plus. The base carries the stack on levelling feet; the junction box links it to the inverter.
The junction box holds a replaceable DC fuse, the battery switch and the battery on/off button, with power and communication cables to the inverter that can be extended to 20 m, so the stacks need not stand right beside it.
Every stack needs one, and up to four run on one inverter. Our PowerOcean Plus package includes one for every three batteries.


PLANNING STACKS
How many you need
This package uses stacks of three batteries, the figure in EcoFlow’s battery manual, so a 30 kWh system with six batteries takes two Base and Junction Box units and 61.2 kWh with twelve takes four. EcoFlow’s newer installation guide allows four per stack on the floor base; your installer confirms the layout.
A three-battery stack on its base and junction box stands 1,406 mm high and weighs about 176 kg.
It is for the PowerOcean Plus three-phase only, and is a different product from the original PowerOcean three-phase base.
Base and Junction Box specifications
| Product | Base & Junction Box-Plus-P3, PTO 5014701006 (junction box EF BD-JC-S2, base EF BD-B-S1) |
| Compatible with | EcoFlow PowerOcean Plus three-phase inverter and PowerOcean LFP 5 kWh batteries |
| Junction box | Replaceable DC fuse, battery switch, battery on/off button, COM ports |
| Stack | 3 batteries per stack (battery manual); up to 4 junction boxes per inverter |
| In the box | Junction box, battery base with 4 adjustable feet, trim cover, 1.5 m battery power cable, two 1.5 m battery communication cables, battery terminals, termination resistor, template and screws |
EcoFlow’s documentation: PowerOcean Plus installation guide (PDF).
Building a PowerOcean Plus
The base and junction box goes with the PowerOcean Plus inverter and PowerOcean LFP batteries. The complete PowerOcean Plus package bundles all three with the meter.
Questions we are asked about the Base and Junction Box
Yes, one for every battery stack on a PowerOcean Plus. Without it the batteries cannot connect to the inverter.
Our packages use three, as in EcoFlow’s battery manual. EcoFlow’s newer installation guide allows four on the floor base; your installer confirms the layout.
Up to four, for twelve batteries and 61.2 kWh.
No. Single-phase stacks use the single-phase battery base, with the inverter on top of the stack.
It is covered as part of your PowerOcean Plus system through EcoFlow South Africa. Contact us with your order number if anything is wrong with it.
Your installer, who also runs the battery cables to the inverter.

Why Buy From EcoHub
Supplied by EcoFlow South Africa
Every PowerOcean and OCEAN 2 system we sell comes through EcoFlow South Africa, so it carries EcoFlow’s local warranty and support.
Built around installers
We supply EcoFlow home systems to installers and electrical contractors, and refer homeowners who need an installation to installers in our network.
The right system, first time
We size each system to your loads before you buy, as a specialist store trading since 2012 and one of South Africa’s largest Huawei Power-M suppliers.
Delivery or collection
Delivered across South Africa, or collected by arrangement. Stock and delivery dates are confirmed with your order.

Reviews
There are no reviews yet